
For UN 1202 with CMR, ADN 2027 requires closed cargo tanks. This memo describes the consequences for open type N tank vessels and supply vessels.
From 1 January 2027, ADN introduces a new entry for UN 1202 with a CMR designation. For supply vessels covered by the ADN transitional provision, nothing changes for the time being. For double-hull open tank vessels (N.3.3 and N.4.3) carrying UN 1202, immediate action may be required.
Background
An increasing number of diesel and gas oil products are being given a CMR classification (H360Fd, toxic to reproduction). As these substances fall under UN 1202, ADN 2027 introduces a separate entry for EN 590 for them. This entry sets additional requirements and may therefore have a direct impact on part of the fleet.
What changes in ADN 2027
ADN 2027 adds a new entry for UN 1202 diesel/gas oil EN 590 where the substance carries a CMR designation. This entry requires a tank vessel with closed cargo tanks, and vapour return is mandatory during loading. A double-hull design was already required because of the environmental hazard; the requirement for closed cargo tanks (N-2-3) is new compared with the existing entry.

Most ADN tank vessels already meet both requirements and will automatically have this entry on their new vessel substance list in 2027.
(The vapour return obligation is discussed in detail in a separate memo.)
It is important for owners and operators to determine now which of the groups below their vessel belongs to:
Supply vessels within the ADN definition are subject to an exception and a transitional provision.
ADN defines a supply vessel as follows:
"Supply vessel means an open type N tank vessel with a dead weight of up to 300 tonnes, constructed and fitted for the carriage and delivery to other vessels of products intended for the operation of vessels;"Double-hull open tank vessels that are not covered by the transitional provision for supply vessels, for example because their dead weight exceeds 300 tonnes or because they were built after 2008, do not meet the new requirement for closed cargo tanks. As a result, the new UN 1202 entry will not be included on their vessel substance list.
If the diesel or gas oil they carry has a CMR designation, these tank vessels will formally no longer be permitted to load that substance from 1 January 2027. Owners and operators of these vessels therefore need to assess in good time whether an exemption is required.
The Dutch government has indicated that it will cooperate in granting exemptions for this type of vessel.
What can you do?
Does your vessel fall outside the transitional provision and not meet the new requirement for closed cargo tanks? Then apply for an exemption in good time. ADN 2027 enters into force on 1 January 2027, and full compliance with the new ADN is required by 30 June 2027.
Transafe can assess what the change means for your vessel and support you with any exemption application.
If you have any questions about this subject, please feel free to contact us.